{"product_id":"multi-user-sip-puff-switch-with-headset","title":"Multi-user Sip-Puff Switch with Headset","description":"\u003ch2\u003eThe light weight wearable sip \/ puff switch for users with limited or no motor capability\u003c\/h2\u003e  \u003cp\u003eThe Multi-User Sip\/Puff Switch with Headset provides healthcare   institutions, assessment centres, hospitals, etc. with a means to   support multiple users while reducing concerns over sanitation. “Sip”   and “Puff” test buttons are integrated to assist in application testing.\u003c\/p\u003e  \u003cp\u003eThe Sip\/Puff Multi-user Headset is uniquely designed to support   disposable mouthpieces.  Each disposable mouthpiece is enclosed in a   sealed package that includes a pair of latex-free gloves and an   instruction sheet. The mouthpiece filter eliminates sanitary concerns on   behalf of both the user and the attendant while retaining sip-puff   convenience, accuracy and reliability. \u003c\/p\u003e  \u003cp\u003eThe disposable mouthpiece attaches in seconds using a snap-fit   fastener and includes an inline aseptic filter to enable hygienic,   worry-free access by a succession of users. \u003c\/p\u003e  \u003cp\u003eAfter usage, the mouthpiece is discarded and replaced so the system is immediately available for the next user.\u003c\/p\u003e  \u003cp\u003eThe disposable mouthpiece is connected by plastic, latex-free tubing   to the Sip\/Puff Switch that converts sips and puffs into electrical   signals. The Sip\/Puff Switch connects to the computer or interface   device through one stereo or two mono cables.\u003c\/p\u003e    \u003cp\u003eThe Multi-user Sip\/Puff Switch with Headset is packaged in a compact   case for easy storage and transport. The case is similar to a small   briefcase, complete with handle and snap closures. \u003c\/p\u003e  \u003ch3\u003eSip\/Puff Switch\u003c\/h3\u003e  \u003cp\u003eThe   Sip\/Puff Switch translates sips and puffs into independent switch   closures. The Sip\/Puff Switch has two (2) 3.5mm ports for connecting two   standard mono cables or a single stereo cable and has integrated test   buttons to assist in application testing.\u003c\/p\u003e  \u003cp\u003eThe two pressure switches have normally open contacts that close   when the user sips or puffs on an attached mouthpiece. These low voltage   and low current signalling switches are designed for connection to an   electronic device – they are not designed to switch power loads.\u003c\/p\u003e  \u003cul\u003e    \u003cli\u003eSip and puff pressure thresholds are approximately 7.5 cm (3-inches) water column below and above ambient pressure\u003c\/li\u003e    \u003cli\u003eSwitches carry 40-milliamps at AC\/DC 30 volts or less with a resistive load, for millions of cycles\u003c\/li\u003e    \u003cli\u003eDual pressure switch has two 3.5-mm (1\/8-inch headphone)   connectors. One connector provides both sip and puff events with a   stereo cable\u003c\/li\u003e    \u003cli\u003eSimple slide switch can be used to change the sense of Sip and Puff signals on the stereo connector\u003c\/li\u003e    \u003cli\u003ePassive pressure switches do not require batteries or external power\u003c\/li\u003e    \u003cli\u003eEnclosure has integrated “sip” and “puff” test switches\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eHeadset\u003c\/h3\u003e  \u003cp\u003eThe   Sip\/Puff Headset is a comfortable, adjustable head frame. The padded   headset slips over the ears and behind the head. A replaceable mouth   tube is held in position with an integral stainless steel forming wire.   The tube and wire can be bent and cut to adapt to individual needs.\u003c\/p\u003e  \u003ch3\u003eMulti-user Sip\/Puff Switch with Headset includes:\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003eSip\/Puff Multi-user Headset – comfortable and adjustable\u003c\/li\u003e    \u003cli\u003eSip\/Puff Switch with integrated “sip” and “puff” pressure switches   (no external power required) and integrated test buttons for assisting   users\u003c\/li\u003e    \u003cli\u003e1.8 metres  (6-foot) air tube with quick-connects for attaching Sip\/Puff Switch and disposable mouthpiece assembly\u003c\/li\u003e    \u003cli\u003eTwo (2) 1.5m (5-foot) cables, one 3.5-mm mono and one 3.5-mm stereo for single or dual cable operation\u003c\/li\u003e    \u003cli\u003eFive (5) Disposable Mouthpiece* assemblies, each sealed with gloves and instruction sheet\u003c\/li\u003e    \u003cli\u003ePortable hard plastic case with foam cushioning for safe transport and storage\u003c\/li\u003e    \u003cli\u003eDocumentation\u003c\/li\u003e  \u003c\/ul\u003e  \u003cp\u003e*Replacement Disposable Mouthpieces are available.\u003c\/p\u003e","brand":"Origin Instruments Corporation","offers":[{"title":"Default Title","offer_id":49189573230836,"sku":"ORAC-0300-MU","price":935.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/5205\/7076\/files\/media_167787e3-db61-4bcd-ab56-16546564a436.jpg?v=1786958318","url":"https:\/\/shop.spectronics.com.au\/products\/multi-user-sip-puff-switch-with-headset","provider":"Spectronics","version":"1.0","type":"link"}